Your position: Home > Products > Liquid-liquid extraction process > Fine chemicals/Petroleum
Lube oil extraction
Lubricating oil can not be easily destroyed; it only gets dirty and is easily contaminated by other solvents. This property makes it a potential pollutant that must not be allowed to get into the environment.
Describe
Working principle
Feature
Parameter
Describe

 
Lubricating oil can not be easily destroyed; it only gets dirty and is easily contaminated by other solvents. This property makes it a potential pollutant that must not be allowed to get into the environment.
Aiming at the disadvantages of traditional centrifugal extractor, Zhengzhou Tianyi Extraction Technology Co.,Ltd. bring out CWL-M series centrifugal extractor, and own independent intellectual property rights , patent number :ZL2014205865573. Under the same handling capacity condition, this machine power consumption is only 10%~30% of traditional anular type, at the same time, short duration of this machine, split phase quickly, high extraction rate, save cost and solvent could be recycled and reused.

Customization or not: Yes
If supply small test or pilot-plant test: Yes
Centrifugal Extractor Working Pinciple:
1.Mixing and mass transfer process:
Light and heavy liquor enter in the annulus mixed zone proportionally and from two different feed pipe orifice respectively, which formed by bowl and shell, with the help of bowl’s rotation, the two phases through turbine disc and impeller mixing and dispersing quickly, after mass transfer completely, to finish mass transfer process.
2.Two phases separation process
With the eddy-current disc help, mixture enter in bowl, at the compartment formed by board, the mixture is quickly synchronized with the bowl, under the action of centrifugal force, the larger density liquor moving away from the bowl center to the wall gradually in the upward flow; and the small density liquor doing the opposite, after clarification, two liquids enter into collection chamber with their own weir plate respectively, and drawn out by tigella, to finish the separation process.
Extractor advantages:
  Separation effect is obvious and large handling capacity;

●  Two phase materials contact with short time, and save extraction agent consumption and save cost;

●  High mass transfer rate, high stage efficiency, convenient start and stop, it can not break balance when stopped.

●  Cover small area, the cost of comprehensive investment is low.

●  Well-adapted, good flexibility, with intermittent operation, or single operation, or continuous counter current operation, and there is no need to add interstage pump.
Centrifugal Extractor Specification:
 
Model Bowl diameter
(mm)
Mixture flux(l/h) Pipe diameter
(mm)
Power(kw) Dimension(mm) Weight(kg)
CWL-25-M 25 10 φ10 0.18 270*200*760 10
CWL-50-M 50 50 DN20 0.18 400*400*800 18
CWL-150-M 150 1000 DN40 0.75 620*630*1150 120
CWL-250-M 250 3000 DN50 0.75-2.5 750*750*1400 460
CWL-350-M 350 8000 DN65 1.5-4 950*950*1688 680
CWL-450-M 450 15000 DN80 3-5.5 1000*1000*1800 880
CWL-550-M 550 30000 DN100 4.-7.5 1200*1200*1760 1100
CWL-650-M 650 60000 DN150 4-7.5 1350*1350*1960 1800
CWL-850-M 850 150000 DN200 7.5-15 1500*1500*2100 22

1. Equipment material will be chosen according to the feed physico-chemical property, common used SS304/316L/904L, common composite material, fluoride material and so on;
2. Above table is general parameter, real device has a little difference, please refer to the matched technological manual;
3. Above flux is under ideal condition, ratio of oil and water is their flux sum when 1:1

Relate Products
Acetochlor extraction extraction
Pesticide extraction
Fine chemical o-cresol formaldehyde epoxy resin production
Fine chemical
Product Inquiry
Please feel free to send us your inquiry, and we will give you a reply within 24 hours.
*Name
*E-mail
Phone
Country:
*Message:
Product Inquiry successful
Your inquire message has been successfully sent.
We will contact you as soon as possible!
View Products