Your position: Home > Products > Liquid-liquid extraction process > Oil water separation
Oil water separation
Tianyi centrifugal extractor could be used for Oil water separation such as crude oil/heavy oil/diesel oil and so on to remove water or salt or others, aimed to petroleum industry, waste oily water treatment, and chemical industry and so on fields.
Describe
Working principle
Feature
Parameter
Describe
Tianyi centrifugal extractor could be used for Oil water separation such as crude oil/heavy oil/diesel oil and so on to remove water or salt or others, aimed to petroleum industry, waste oily water treatment, and chemical industry and so on fields. Our fourth generation oil-water separator/extractor with our own proprietary intellectual property rights, and patent number: ZL2014205865573, it has many outstanding advantages, such as low power consumption, high speed separation, high extraction efficiency, save cost and so on.
 
Product other name:
Crude oil dehydration equipment, diesel oil and water separation equipment, waste oily water treatment equipment, reclaimed lubricating oil and water separation equipment.

Customization or not: Yes
If supply small test or pilot-plant test: Yes
Extractor working principle:
1.Mixing and mass transfer process:
Light and heavy liquor enter in the annulus mixed zone proportionally and from two different feed pipe orifice respectively, which formed by bowl and shell, with the help of bowl’s rotation, the two phases through turbine disc and impeller mixing and dispersing quickly, after mass transfer completely, to finish mass transfer process.
2. Two phases separation process
With the eddy-current disc help, mixture enter in bowl, at the compartment formed by board, the mixture is quickly synchronized with the bowl, under the action of centrifugal force, the larger density liquor moving away from the bowl center to the wall gradually in the upward flow; and the small density liquor doing the opposite, after clarification, two liquids enter into collection chamber with their own weir plate respectively, and drawn out by tigella, to finish the separation process.
Extractor advantages:
  Separation effect is obvious and large handling capacity;

●  Two phase materials contact with short time, and save extraction agent consumption and save cost;

●  High mass transfer rate, high stage efficiency, convenient start and stop, it can not break balance when stopped.

●  Cover small area, the cost of comprehensive investment is low.

●  Well-adapted, good flexibility, with intermittent operation, or single operation, or continuous counter current operation, and there is no need to add interstage pump.
Centrifugal Extractor Specification::
 

Model 

 Bowl diameter
(mm)

Mixture flux(l/h)

Pipe diameter
(mm)

Power(kw)

Dimension(mm)

Weight(kg)

CWL-25-M

25

10

φ10

0.18

270*200*760

10

CWL-50-M

50

50

DN20

0.18

400*400*800

18

CWL-150-M

150

1000

DN40

0.75

620*630*1150

120

CWL-250-M

250

3000

DN50

0.75-2.5

750*750*1400

460

CWL-350-M

350

8000

DN65

1.5-4

950*950*1688

680

CWL-450-M

450

15000

DN80

3-5.5

1000*1000*1800

880

CWL-550-M

550

30000

DN100

4.-7.5

1200*1200*1760

1100

CWL-650-M

650

60000

DN150

4-7.5

1350*1350*1960

1800

CWL-850-M

850

150000

DN200

7.5-15

1500*1500*2100

22

1. Equipment material will be chosen according to the feed physico-chemical property, common used SS304/316L/904L, common composite material, fluoride material and so on;
2. Above table is general parameter, real device has a little difference, please refer to the matched technological manual;
3. Above flux is under ideal condition, ratio of oil and water is their flux sum when 1:1.

Relate Products
Product Inquiry
Please feel free to send us your inquiry, and we will give you a reply within 24 hours.
*Name
*E-mail
Phone
Country:
*Message:
Product Inquiry successful
Your inquire message has been successfully sent.
We will contact you as soon as possible!
View Products