The process of purchasing the experimental centrifugal extractor requires understanding many technical details and practical considerations. This article provides an overview of the working principle, material selection and application characteristics of the experimental centrifugal extractor.
Zhengzhou Tiei Extraction Science & Technology Co., Ltd. CWL-M series experimental centrifugal extractor mainly has two models: CWL-50M and CWL-25M. Its unique design and excellent performance have attracted widespread attention. Its working principle is mainly to use the rotation of the drum, turbine disk and impeller to fully transfer the light and heavy phases. Finally, with the help of strong centrifugal force, the light and heavy phases are effectively separated and flow out from their respective outlet.
When purchasing the experimental centrifugal extractor, special attention should be paid to the following four major considerations:
1. Equipment model selection is based on flow requirements: Different models of centrifugal extractors correspond to different processing flow standards.Therefore, when purchasing, the appropriate equipment model must be determined based on the throughput level required for the experiment.
2. Match the impeller type to the material characteristics: Which type of impeller to choose mainly depends on the nature of the materials to be processed. For example, for materials that are easily emulsified, priority should be given to using the inner impeller,because its mixing intensity is moderate, which can effectively prevent excessive emulsification and ensure that the material reaches an ideal uniform state during the mixing process.
3. Component materials are adapted to local conditions: Different parts of the equipment adopt diversified material configurations. For example, the elbows of small models are usually made of polypropylene (PP) materials with good corrosion resistance, while the connection parts between machines tend to be made of high-temperature-resistant, Chemically resistant polytetrafluoroethylene (PTFE) material.For large and medium-sized machines, in order to adapt to higher pressure-bearing capacity and more complex working conditions, composite pipes or steel wire hoses will be used as inter-machine connections to ensure that the equipment can maintain good sealing and durability under harsh conditions.
4. The connection method between the drum and the motor shaft: In small experimental centrifugal extractors, the connection between the drum and the motor shaft is generally bolted rather than keyed (pin). Because the bolted connections are easier and faster to install and disassemble, and compared with key (pin) connections, they are less likely to be damaged during use.
The process of purchasing the experimental centrifugal extractor requires understanding many technical details and practical considerations. The above overview is only a basic introduction to the working principle, material selection and application characteristics of the experimental centrifugal extractor. If you want to obtain more detailed purchasing guidance and customized solutions, welcome contact us directly.
